Automatic Speeding Fines on 13 New York Roads: What Drivers Need to Know

Automatic Speeding Fines on 13 New York Roads
Automatic Speeding Fines on 13 New York Roads

As road safety continues to be a priority across New York, new measures have been introduced to ensure that drivers adhere to speed limits in specific work zones. From now until September 21, 2024, drivers on designated roads in New York may receive automatic speeding fines, even if they are unaware of exceeding the speed limit. These fines will be issued under New York Vehicle & Traffic Law 1180-E, aimed at enhancing safety in work zones across the state.

Here’s a detailed look at the enforcement of these fines and the roads affected.

Watch out if you drive here in New York, Automated Speeding Fine Initiative

To ensure the safety of workers and drivers alike, New York has implemented an automated system to monitor speeding in certain construction zones. The fines are part of a five-year initiative led by the State Department of Transportation (NYSDOT) and the Thruway Authority (NYSTA). By monitoring speeds automatically, this initiative seeks to reduce accidents and enforce speed limits in work zones.

How the Program Works

Under this system, speeding fines are automatically issued when vehicles are detected going over the speed limit in designated work zones. The critical point is that these fines are sent to the registered vehicle owner, regardless of who was driving at the time of the violation. This means that car owners are responsible for ensuring anyone driving their vehicle adheres to the speed limits in these areas.

Key Details of the Automatic Fine System

  • Enforcement Duration: This program is effective through September 21, 2024.
  • Who Is Responsible?: The registered vehicle owner is held financially responsible for fines, even if someone else is driving the car.
  • No Distinction Between Drivers: The system doesn’t account for who is driving. Whether it’s a friend, family member, or the owner, the fine will be issued to the vehicle’s registration holder.

Important Tips for Avoiding Fines

Drivers and vehicle owners should take extra care when driving through these zones. It’s crucial to follow posted speed limits, especially in the affected areas. Ensure anyone driving your car is also aware of these automated fines and the work zones where the program is active. Being informed and cautious will help avoid penalties while contributing to safer road conditions.

Roads Affected by the Speeding Fine Program

The following roads are subject to automatic speed monitoring in their designated work zones:

  1. New York Route 33 (Erie County)
    • NY Route 33 over Elm Street
  2. Interstate 95 (Bronx County)
    • I-95 S/B Cross Bronx Expressway at Jerome Avenue
    • I-95 N/B Bruckner Expressway at Westchester Avenue
    • I-95 N/B Bruckner Expressway between Country Club Road
    • I-95 N/B Cross Bronx Expressway at Jerome Avenue
  3. Parkway 907 H (Bronx County)
    • PK-907H N/B Bronx River Parkway at Watson Avenue
  4. Interstate 290 (Erie County)
    • I-290 between I-190 and NY Route 384
  5. Interstate 87 (Essex and Warren Counties)
    • I-87 SB over West Mill Brook, South of Exit 30
    • I-87 SB between Exit 22 and Exit 23, Bridge over Route 9
  6. Interstate 490 (Monroe County)
    • I-490 EB at Alexander St
    • I-490 WB at Alexander St
  7. Interstate 495 (Nassau, Queens, and Suffolk Counties)
    • I-495 WB from Exit 37 to Exit 48
    • I-495 E/B Long Island Expressway at Cross Island Parkway
    • I-495 from Wading River Road to Yaphank Ave
  8. Interstate 481 (Onondaga County)
    • I-481 near Northern interchange with I-81
  9. Interstate 81 (Onondaga County)
    • I-81 over E. Colvin Street Bridge
  10. Interstate 678 (Queens County)
  • I-678 N/B Van Wyck Expressway at Hillside Avenue
  1. Interstate 88
  • Additional sections monitored for work zone safety.

Read More: Big DMV Changes Coming to California Drivers in October 2024: What Major Changes to Expect

Why Work Zone Safety Matters

Work zones are often areas of high risk due to ongoing construction and frequent changes in road layout. Speeding in these zones not only endangers the lives of construction workers but also increases the likelihood of accidents. By enforcing stricter speed limits through automatic monitoring, New York aims to reduce accidents, protect workers, and maintain the smooth flow of traffic in these critical areas.

Conclusion

Driving through New York’s highways and work zones requires extra vigilance now more than ever. Automatic speeding fines on 13 roads will ensure that speed limits are respected, with fines issued directly to vehicle owners regardless of who is driving. To avoid these penalties and contribute to safer roads, stay within the speed limits, especially in marked work zones. With this initiative running until September 2024, New York’s commitment to road safety is clear—drive responsibly and protect both yourself and others on the road.

JMichael Clements – Managing Partner JMichael Clements has lived in Demopolis for over 30 years and brings 25+ years of experience in computer technology and 12+ years in photography. As a key figure at The Watchman, he serves as the lead photographer and oversees article quality as the website editor, combining his technical expertise with creative skills to enhance the company’s visual and online presence.
Exit mobile version